- Home
- About us
- Products
- for Siemens
- ABB
- Allen Bradley
- AMTouch
- Beijer HMI
- Bosch Rexroth
- B&R Power Panel
- DMC
- Delem
- Delta
- Fagor
- ESA HMI
- ELO Touch Screen Panel
- EATON Micro Panel
- Exor UniOP
- GE Fanuc
- John Deere
- Koyo
- KUKA SmartPAD
- Lenze
- Mitsubishi
- Omron
- Panasonic
- Proface
- Red Lion
- Robotic Controller
- Schneider
- Trimble
- Ventilator Parts
- Sigmatek HMI
- Microtouch 3M Versatouch touch screen
- GUNZE Touch Panel
- Danielson Touch Screen Replacement
- Fuji Hakko
- EZ Automation
- BECKHOFF HMI operator Repair
- Other Terminal Brand
- HMI Touch Screen Panel
- Touch Screen Panel supplier
- LCD Display
- Touch Panel Screen Suppliers
- Auxiliary Accessories
- IDEC
- Advantech
- Faqs
- News
- Certificate
- Contact us
IDEC FT1A-C14SA-B HMI Touchscreen Replacement
- group name
- HG2A, HG2S, FT1A 3.8-inch PLC+HMI
- Min Order
- 1 piece
- brand name
- VICPAS
- model
- FT1A-C14SA-B
- Nearest port for product export
- Guangzhou, Hongknog, Shenzhen, Taiwan
- Delivery clauses under the trade mode
- FOB, CFR, CIF, EXW, FAS, CIP, FCA, CPT, DEQ, DDP, DDU, Express Delivery, DAF, DES
- Acceptable payment methods
- T/T, L/C, D/P D/A, MoneyGram, Credit Card, PayPal, Westem Union, Cash, Escrow
- update time
- Sun, 12 May 2024 19:37:49 GMT
Paramtents
Warranty 365 Days
Shipping 2-4 workdays
Brand IDEC
Supply Parts Touch Screen Film
Display Size 3.8 inches
Packging & Delivery
-
Min Order1 piece
Briefing
Detailed
IDEC FT1A 3.8IN PLC+HMI FT1A-C14SA-B Touch Screen Panel Replacement
Safety Precautions
1. Prevent the IDEC FT1A-C14SA-B Touchscreen from falling while moving or transporting, otherwise damage or malfunction of the Touch will result.
2. Improper installation will result in falling, failure, electrical shock, fire hazard, or malfunction of the Touch.
3. Any twists in the gasket and the Mounting Gasket will impair the waterproof characteristics.
4. The FT1A 3.8IN PLC+HMI FT1A-C14SA-B Touch Panel is made of glass and will break if exposed to excessive shock. Take due care when handling it.
5. Do not push hard or scratch the touch panel and protection sheet with a hard object such as a tool, because they are damaged easily.
6. Do not tighten the mounting clips obliquely to the panel or excessively, otherwise the IDEC FT1A-C14SA-B HMI Panel Glass may warp and cause wrinkle on the display, or the waterproof characteristics may be impaired.
7. The FT1A-C14SA-B Touch Digitizer Glass uses an LCD(liquid crystal display) as a display device. The liquid inside the LCD is harmful to the skin. If the LCD is broken and the liquid attaches to your skin or clothes, wash the liquid off using soap, and consult a doctor immediately.
8. Turn off the power to the Touch before installation, removal, wiring, maintenance, and inspection of the Touch. Failure to turn power off may cause electrical shock or fire hazard.
9. Emergency and interlocking circuits must be configured outside of the FT1A-C14SA-B Touch Membrane. Do not use the Touch's internal touch switches for an emergency circuit. If the Touch failed, the external equipment connected to the Touch will no longer be protected and serious injury to operators and equipment damage may be caused.
10. Special expertise is required to install, wire, configure, and operate the FT1A-C14SA-B Touch Panel. People without such expertise must not use the Touch.
Specifications:
The table below describes the parameters of the IDEC FT1A 3.8IN PLC+HMI FT1A-C14SA-B Touch Digitizer Glass HMI.
| Warranty: | 1-Year Warranty |
| Storage Humidity: | 10 to 90% RH |
| Corrosion Immunity: | Free from corrosive gases |
| Storage Temperature: | -20 ~ 70°C |
| Brand: | IDEC |
| Operating Temperature: | -20 ~ 60°C |
| Model Number: | FT1A-C14SA-B |
| Display Size: | 3.8" |
| Screen Type: | Analog Resistive Film |
| Product Line: | FT1A 3.8IN PLC+HMI |
Related IDEC FT1A 3.8IN PLC+HMI No. :
| FT1A 3.8IN PLC+HMI | Description | Inventory status |
| FT1A-C12RA-B | IDEC FT1A 3.8IN PLC+HMI Touch Screen Panel Replacement | In Stock |
| FT1A-C12RA-S | IDEC FT1A 3.8IN PLC+HMI Touch Digitizer Glass Repair | Available Now |
| FT1A-C14KA-B | IDEC FT1A 3.8IN PLC+HMI Touch Screen Film Replacement | In Stock |
| FT1A-C14KA-S | IDEC FT1A 3.8IN PLC+HMI Touch Screen Glass Repair | Available Now |
| FT1A-C14SA-S | IDEC FT1A 3.8IN PLC+HMI MMI Panel Screen Repair | Available Now |
| FT1A-M12RA-B | IDEC FT1A 3.8IN PLC+HMI Touchscreen Monitor Replacement | In Stock |
| FT1A-M12RA-S | IDEC FT1A 3.8IN PLC+HMI Touch Screen Tablet Repair | Available Now |
| FT1A-M14KA-B | IDEC FT1A 3.8IN PLC+HMI Touch Screen Film Replacement | In Stock |
| FT1A-M14KA-S | IDEC FT1A 3.8IN PLC+HMI HMI Touch Membrane Repair | Available Now |
| FT1A-M14SA-B | IDEC FT1A 3.8IN PLC+HMI Touch Screen Glass Replacement | In Stock |
| FT1A-M14SA-S | IDEC FT1A 3.8IN PLC+HMI Touch Screen Panel Repair | Available Now |
| FT1A 3.8IN PLC+HMI | Description | Inventory status |
IDEC FT1A 3.8IN PLC+HMI Manuals PDF Download:
FAQ:
Question: Can I connect external devices to the FT1A-C14SA-B HMI?
Answer: Yes, the FT1A-C14SA-B HMIs typically offer various communication ports, such as Ethernet, USB, RS232, or RS485. These ports allow you to connect external devices, such as PLCs, sensors, or other control equipment, for data exchange and system integration.
Question: How can I create and modify screens on the FT1A-C14SA-B HMI?
Answer: FT1A-C14SA-B HMI usually comes with dedicated software for screen development. Install the software on your computer, and then use it to design and customize screens with elements like buttons, images, text, and data display. The software often offers intuitive drag-and-drop interfaces for easy screen creation and modification.
Common misspellings:
T1A-C14SA-B
FT1AC14SA-B
FT1A-C14SA-
FT1A-C14SA-BB
FT1A-C14S-AB