John Deere 1800 Display VS 2600 Monitor VS 2630 Display VS 4640 Display

• John Deere GS2 1800 Display

  The GS2 1800 is a 17.8 cm (7 in.) LCD display that features state-of-the art, full-color screens and allows the operator to manage the applications for their GreenStarsystems.One function of the GS2 1800 is to operate as an ISO virtual terminal. This means any brand of implement thatis an ISOBUS Virtual Implement can be plugged in andrun through the GS2 1800 display. One example of an ISOBUS implement is the Seed Star 2 system for new John Deere planters and air seeding equipment. The GS2 1800 is considered the entry-level display for the Seed Star 2 systems.
  
  
  

• John Deere Greenstar GS2 2100 display

  Used 2100 display in good working order for sale. You can still buy autotrac activations for this display, and it can also be used to replace a brown box greenstar display on older air seeders, planters, and combines or an 1800 GS2 display on newer air seeders. I will sell them either separately or together. The 2100 display does everything the 2600 GS2 display will do, but uses the scroll wheel and buttons to navigate on screen instead of touchscreen. Starfire ITC receiver pictured has already been sold.
  
  
  

• John Deere GreenStar 2600 Monitor

  GreenStar 2 (GS2) 2600 Monitor Display requires one of any three - Reverse, Neutral, or Curves/Circles signal from the SSU to allow AutoTrac to activate. SSU Software = All listed software versions are THE LATEST PRODUCTION versions to operate the GS2 system.
  
  Custom Performance Website will provide a listing of all factory installed SSU software version numbers.ASSEMBLY # is the Custom Performance Website Software number. APPLICATION # is the actual 6 digit software number you will view on the vehicle when looking in diagnostic mode on the SSU.
  
  
  

• John Deere GreenStar 2630 Gen 3 Display

  The John Deere GreenStar™ 3 (GS3) 2630 Display is a 26-cm (10.4-in.) color display that features a full-color touch screen for controlling a variety of precision applications, machines, and implements. The GS3 2630 Display also allows operators to set up multiple home pages and navigate to each home page easily and efficiently, all while other applications are in use. The GS3 2630 Display is specifically designed for producers who desire maximum efficiency, productivity, and premium features.
  
  
  

• John Deere 4200 CommandCenter Display

  The 4200 CommandCenter provides a 21.3-cm (8.4–in.) value spec solution for producers wanting a display that is AutoTrac™ guidance, Section Control, Data Sync, and ISOBUS documentation capable only. Offering AutoTrac, Section Control, Data Sync and ISOBUS documentation Ag Management Solutions (AMS) technology in addition to monitoring machine functions provides operators with an economical display, enabling core AMS functionality while maximizing visibility to operations outside the cab.
  
  
  

• GreenStar 4240 Gen 4 Universal Display

  The 4240 Universal Display provides the latest update and improved operating experience for legacy John Deere machines and mixed-fleet operators loaded with benefits such as documentation and variable-rate application functionality included in base price of the display, easy setup and startup of operations, documentation and setup data exchange with John Deere Operations Center through Wireless Data Transfer (WDT) and the ability to precisely map and operate Section Control for up to 255 sections for all ISOBUS implements.
  
  
  

• John Deere GreenStar 4640 Gen 4 Universal Display

  The 4640 offers the latest John Deere display technology offered in a moveable and user-friendly Gen 4 experience. Providing enhanced usability, increased performance, and greater operator choice, the 4640 Universal Display delivers value by offering all that is available with the 4240 as well as precision application of multiple products simultaneously with individual coverage maps and application points, fully automated headland turns with AutoTrac Turn Automation, passive Autotrac implement guidance and the ability to share coverage map and guidance lines seamlessly with up to six machines.
  
  
  

The 4640 display incorporates the easy-to-use layout of the 4600 Command Center and the portability of the GreenStar 2630. With the release of the new 4640 display, John Deere has moved to a subscription based activation system which is different from the previous approach of a one-time activation purchase. Now activations for the 4640 are offered in four different configurations shown below:

1-year Autotrac Subscription $850

5-year Autotrac Subscription $4000

1-year Premium Subscription $1700 (Autotrac, Swath Control, Documentation)

5-year Premium Subscription $8000 (Autotrac, Swath Control, Documentation)

The 5-year subscription option is only available at the point of purchase of the new 4640 display. If you choose to go with a one-year subscription, you will not have the option to purchase the five-year subscription down the road.

This price comparison graphic illustrates a customer’s cost of entry for a 4640 Universal Display and a 1-year subscription compared to a similarly activated GS3 2630 display.

Why the change to subscription-based activations? Subscription-based precision ag offerings provide the following benefits:

1. Lower cost of entry to get started with display and subscriptions

2. Ability to try new applications for a year without having to commit to a permanent software license

3. Ability to match the cost of use with the revenue generated in the same fiscal year

4. Flexibility in selecting the level and duration of subscription that best fits the needs of the business without the expense of a one-time software license purchase

As previously mentioned, the 4640 display is portable, much like the GreenStar 3 2630 display. One of the things that the 4640 display is capable of over the 2630 display is that the 4640 can be used in conjunction with a Gen 4 extend monitor. This allows you to run the 4640 display with double the screen space.

The 4640 display also has enhanced data capturing abilities making section control and coverage maps more accurate. Setting on/off times is made much easier with the 4640 display. Simply select skip or overlap and enter the distance and speed. The new operating system on the 4640 functions like a smart phone with swipe and touch integration.

At this time the 4640 display has a few limitations, but John Deere will correct these with upcoming software updates that wwill make the 4640 display even more versatile. Some of the current limitations of the 4640 display are: RowSense in combines, Vision and RowSense in sprayers, Coverage map and A/B line sharing, and Machine sync. Also, the 4640 display is also not fully compatible with the John Deere Rate Controller 2000 at this time.