DMC AST-121A080A Touch Screen Panel Glass Original

group name: ATP/AST Series

Min Order: 1 piece

brand name: VICPAS

model: AST-121A080A

Nearest port for product export: Guangzhou, Hongknog, Shenzhen, Taiwan

Delivery clauses under the trade mode: FOB, CFR, CIF, EXW, FAS, CIP, FCA, CPT, DEQ, DDP, DDU, Express Delivery, DAF, DES

Acceptable payment methods: T/T, L/C, D/P D/A, MoneyGram, Credit Card, PayPal, Westem Union, Cash, Escrow

update time: Thu, 21 Nov 2024 22:39:34 GMT

contact supplier

Paramtents

Touch screen panel type Resistance touch screen
Size 12.1 inch
Warranty 365 Days
Shipping 2-3 working Days
Modle AST-121A / AST-121A080A
Tail Length & Position 80mm (Left Side)
External Dimension(E) 263.0 x 201.0mm
Glass Thickness(Total) 1.8mm (2.1mm)

Packging & Delivery

Min Order1 piece

Briefing

12.1 inches Resistive Touch Screen, Glass Thickness 1.8mm, Original-365 Days Warranty-Fully Tested-Factory Prices-Fast Shipping

Detailed

DMC AST-121A AST-121A080A Touch Screen Panel Glass Original Repair Replacement

The AST-121A080A work Maximum Voltage DC6V with 100mA Top Electrode, Bottom Electrode 100mA, Between the Top and Bottom. Tail Length & Position 80mm (Left Side), External Dimension 263.0 x 201.0mm, Glass Thickness(Total) 1.8mm (2.1mm).The touch screen type is analog resistive 4-wire. Highly durable and versatile. Operation is guaranteed up to as many as 10 million strokes (4-wire type)/ 35 million strokes (5-wire type).

DMC AST121A080A touchscreen panel work Operating Temperature: -20 °C to 70 °C (no condensation), Operating Humidity -20°C to 60°C Less than 90%RH (no condensation) Exceeding 60°C 133.8g/m3 (no condensation).

VICPAS supply DMC AST-121A080A 12.1 inches Touch Screen Panel Glass Original for repair replacement. All of them with VICPAS 365 days warranty and support Urgent Worldwide Shipping.

Contact Best Price

Specifications:

The table below describes the parameters of the DMC AST-121A080A Touch screen Panel Glass.

Part Number :	AST-121A080A
Manufacturer:	DMC
Screen diagonal	12.1 in
Warranty:	365 Days Warranty
Interfaces	USB / RS232

Touchpoints:	1
Glass Strength:	1.8 mm
Technology:	Analog resistive 4-wire
Active Area:	250.0 x 188.5mm
Viewing Area Dimension	247.0 x 185.5mm

DMC AST / ATP Series Manuals PDF Download:

DMC AST-121A080A datasheet pdf

sDMC AST / ATP Series manual Product Specifications

DMC AST / ATP Touch Screen Handling Notes

Precautions
This product is intended for use in standard applications (computers, office automation, and other office equipment, industrial, communications, and measurement equipment, personal and household devices, etc.)

Please avoid using this product for special applications where failure or abnormal operation may directly affect human lives, or cause physical injury or property damage, or where extremely high levels of reliability are required (such as aerospace systems, vehicle operating control, atomic energy controls, medical devices for life support, etc.).

Handling Notes

Do not depress or scratch the product with any object with a sharp edge or hard end.
Do not put this product close to fire.
Do not wipe this product with too much load.
Do not strongly rub this product locally. It may affect the product’s functions.
Do not hit the product with a hard object.
Do not forcibly bend or fold the product.
When the product is stored, make sure it is packed in a packing box and stored in a storage temperature range, eliminating any outside load.
Do not use or store the product under a condition where the product will be exposed to water, organic solution or acid.
Do not use the product under the direct sunlight.
Do not disassemble the product.
When you handle the product, Hold the product by its body. Do not hold by the tail.
Clean the product with a soft cloth or a soft cloth with neutral detergent or alcohol. When contaminated by chemicals, wipe them off immediately with caution not to cause injury to human body.
The edge of the glass is not rounded and may cause injury.

Construction Notes

The environmental specifications, mechanical characteristics, and electrical characteristics are only applied to the Active Area.
Do not use the touchscreen when the condensation occurs. The condensation inside of the touchscreen is a natural phenomenon and should disappear after the touchscreen is warmed up.

Common misspellings:

ST-121A080A

AT-121A080A

AS-121A080A

AST-121A08A

AST-121A080