Paramtents
Brand Schneider
Product Line Magelis iDisplay
Touch Size 19 inch
Supply MPCYT90NNN00N Touch Screen Panel Front Overlay
Warranty 365 Days
Touch screen panel type Resistance touch screen
Packging & Delivery
Min Order1 piece
Briefing
Detailed
Magelis Schneider MPCYT90NNN00N industrial touchscreen display is in the range of Magelis iDisplay, the component type is Flat Screen. MPCYT90NNN00N Touch Screen Panel Glass Terminal Type is Touchscreen display integrating USB or RS232C port, VGA or DVI-D port. MPCYT90NNN00N Touch Digitizer Glass HMI rated supply voltage is 100...240 V AC power supply conforming to EN 61131-2, Supply voltage limits 98...264 V. Schneider Magelis iDisplay MPCYT90NNN00N Touchscreen Panel is 15 inch with active matrix colour TFT 1280 X 1024 pixels XGA LCD Display.
VICPAS supply MPCYT90NNN00N Magelis Schneider Touch screen panel glass and protective film with 365 Days warranty and support Urgent Worldwide Shipping.
The table below describes the parameters of the MPCYT90NNN00N Magelis Schneider Front Overlay Touch Screen.
Part Number: | MPCYT90NNN00N |
Display Type: | LCD TFT |
Screen Diagonal: | 19 in |
Warranty: | 365 Days |
Product Line: | Magelis iDisplay Series |
Terminal Type: | Touchscreen Display |
Operating Temp.: | 0...50 °C |
Storage Temp.: | -20...60 °C |
Display Resolution: | 1280 x 1024 pixels SVGA |
Operating System: | Windows XPe SP2 |
Related Magelis Schneider iDisplay Series Part No. :
Magelis iDisplay Series | Description | Inventory status |
XBTF011110 | Operator Terminals with 5.7-inch Operator Keypad | In Stock |
Magelis iDisplay | Description | Inventory status |
Question: How to install the Schneider Magelis iDisplay MPCYT90NNN00N Power Switch Cover?
Answer:
1. Shut down Windows® in an orderly fashion and remove all power from the device.
2. Remove the iDisplay unit from its mounting and place it on a clean level surface with the front panel facing downwards.
3. Switch ON the power switch.
NOTE: The 24 Vdc power supply inside the DC-powered iDisplay units is protected by an 8 A fuse. This fuse is located inside the power supply and cannot be accessed or replaced by the user.
4. Attach the power switch cover with the screw. Use a torque of 0.5 to 0.6 N•m (4.5 to 5.3 lb-in):
5. First ensure that the power cord is disconnected from the main power supply, then connect the power cord to the iDisplay unit
Question: What is the size of MPCYT90NNN00N Protective Film HMI Panel Glass?
Answer: The Schneider Terminal MPCYT90NNN00N Touch Screen Monitor Front Overlay is 19-inch.
网络文化经营许可证:浙网文[2013]0268-027号|增值电信业务经营许可证:浙B2-20080224-1 2007-2024 Tradevv.com. All rights reserved.