- Home
- About us
- Products
- for Siemens
- for A-B-B
- Advantech
- Allen Bradley
- AMTouch
- B&R Power Panel
- BECKHOFF HMI operator Repair
- Beijer HMI
- Bosch Rexroth
- Danielson Touch Screen Replacement
- Delem
- Delta
- DMC
- EATON Micro Panel
- ELO Touch Screen Panel
- ESA HMI
- Exor UniOP
- EZ Automation
- Fagor
- Fuji Hakko
- GE Fanuc
- GUNZE Touch Panel
- IDEC
- John Deere
- Koyo
- KUKA SmartPAD
- Lenze
- Microtouch 3M Versatouch touch screen
- Mitsubishi
- Omron
- Panasonic
- Parker
- Proface
- Red Lion
- Robotic Controller
- Schneider
- Sigmatek HMI
- Trimble
- Ventilator Parts
- Weinview
- Other Terminal Brand
- HMI Touch Screen Panel
- Touch Panel Screen Suppliers
- Touch Screen Panel supplier
- Auxiliary Accessories
- LCD Display
- Faqs
- News
- Certificate
- Contact us
6FC5203-0AF05-0AA0 Siemens OP015A Keypad Membrane
- group name
- SINUMERIK Operator Panel
- Min Order
- 1 piece
- brand name
- VICPAS
- model
- 6FC5203-0AF05-0AA0
- Nearest port for product export
- Guangzhou, Hongknog, Shenzhen, Taiwan
- Delivery clauses under the trade mode
- FOB, CFR, CIF, EXW, FAS, CIP, FCA, CPT, DEQ, DDP, DDU, Express Delivery, DAF, DES
- Acceptable payment methods
- T/T, L/C, D/P D/A, MoneyGram, Credit Card, PayPal, Westem Union, Cash, Escrow
- update time
- Fri, 22 Nov 2024 11:06:51 GMT
Paramtents
Brand Siemens
Warranty 6 Months
Product Line Siemens OP015A Operator Panel
Supply Sinumer HMI OP015A Membrane Keyboard Plastic Case
size 15 inch
Packging & Delivery
-
Min Order1 piece
Briefing
6FC5203-0AF05-0AA0 Siemens Sinumer HMI OP015A membrane Switch. 6-months Warranty-Fully Tested-Factory Prices-Fast Shipping
Detailed
6FC5203-0AF05-0AA0 Siemens SINUMERIK HMI OP0 15A OPERATOR PANEL Terminal Keypad and Plastic Case Repair Replacement
Front and rear side of Siemens 6FC5203-0AF05-0AA0 Membrane Keyboard
The front interface is USB 1.1 to connect an external keyboard or mouse. Note that the electromagnetic compatibility of commercially available peripheral devices operated via the USB port of 6FC5 203-0AF05-0AA0 is usually rated for office use only. For industrial use, components with a higher degree of certification are recommended. The rear interface of 6FC52030AF050AA0 Membrane Keypad Switch has two cables for connecting the PCU: I/O USB cable K1 (ribbon cable): All signals that are used for the display interface and the connection of operator panel fronts (e.g.supply voltages) and Display cable K2.
Preparation for mounting of Siemens 6FC52030AF050AA0 Switch Membrane
Thanks to the tension jacks on the OP 015A 6FC5203-0AF05-0AA0, drill-holes or screw holes are not needed. This retaining method also affords a degree of protection IP65 (but only in conjunction with a circumferential seal and when the protective USB cap is fitted). If you want to combine the OP 015A 6FC5 203-0AF05-0AA0 Membrane Keypad with a PCU and possibly a direct control key module, assemble the components before installing them on the mounting wall.
Mounting 6FC5203-0AF05-0AA0 Terminal Keypad on the mounting wall
The clearance at the rear of the PCU must be at least 10 mm to ensure sufficient ventilation. Permitted mounting position: deviating by up to 5 from the vertical. This value can be further restricted by installed components of 6FC52030AF050AA0 Operator Keyboard (PCU, video link receiver,...).
The front interface is USB 1.1 to connect an external keyboard or mouse. Note that the electromagnetic compatibility of commercially available peripheral devices operated via the USB port of 6FC5 203-0AF05-0AA0 is usually rated for office use only. For industrial use, components with a higher degree of certification are recommended. The rear interface of 6FC52030AF050AA0 Membrane Keypad Switch has two cables for connecting the PCU: I/O USB cable K1 (ribbon cable): All signals that are used for the display interface and the connection of operator panel fronts (e.g.supply voltages) and Display cable K2.
Preparation for mounting of Siemens 6FC52030AF050AA0 Switch Membrane
Thanks to the tension jacks on the OP 015A 6FC5203-0AF05-0AA0, drill-holes or screw holes are not needed. This retaining method also affords a degree of protection IP65 (but only in conjunction with a circumferential seal and when the protective USB cap is fitted). If you want to combine the OP 015A 6FC5 203-0AF05-0AA0 Membrane Keypad with a PCU and possibly a direct control key module, assemble the components before installing them on the mounting wall.
Mounting 6FC5203-0AF05-0AA0 Terminal Keypad on the mounting wall
The clearance at the rear of the PCU must be at least 10 mm to ensure sufficient ventilation. Permitted mounting position: deviating by up to 5 from the vertical. This value can be further restricted by installed components of 6FC52030AF050AA0 Operator Keyboard (PCU, video link receiver,...).
Specifications:
The table below describes the parameters of the 6FC5203-0AF05-0AA0 Siemens OP015A HMI Parts.
| Combination: | TCU, PCU and Videolink Receiver |
| Mounting Depth: | Slight |
| Attachment: | Tension Jacks |
| Mounting Format: | 19'' |
| Integrated Mouse: | No |
| Flat Screen: | 15'' TFT |
| Resolution: | 1024 x 768 Pixels |
| Temperature: | Overtemperature |
| Power Supply: | Status LEDs |
| Panel Cutout: | 450 x 290 mm |
Related Simatic OP015A Part No. :
| SINUMERIK OP015A Keypad | Description | Inventory status |
| 6FC5203-0AF50-0AA0 | Siemens SINUMERIK HMI OP015 Terminal Keypad Repair | In Stock |
| 6FC5203-0AF50-0DA0 | Siemens OP015-434C Membrane Switch Replacement | Available Now |
| 6FC5203-0AF50-5AA0 | Siemens Operator Keyboard Repair | In Stock |
| 6FC5203-0AF50-6AA0 | Siemens SINUMERIK HMI OP015 Keypad Membrane Replacement | In Stock |
| 6FC5203-0AF53-1AB2 | Siemens TP015AT Membrane Keypad Switch Repair | Available Now |
| 6FC5203-0AF53-1AB3 | Siemens SINUMERIK Keyboard Membrane Replacement | In Stock |
| 6FC5210-0DF22-2AA0 | Siemens SINUMERIK HMI OP015 Terminal Keypad Repair | Available Now |
| 6FC5248-0AF03-0AA0 | Siemens OP015 Switch Membrane Repair | Available Now |
| 6FC5248-0AF25-0AA0 | SINUMERIK HMI OP015 Membrane Keypad Replacement | In Stock |
| 6FC5303-0AF14-0AA0 | Siemens OP015 Membrane Keypad Touch Screen Glass Replacement | Available Now |
| 6FC5303-0AF50-5AA0 | SINUMERIK OP015 Membrane Keyboard Repair | In Stock |
| 6FC5303-0AF50-6AA0 | Siemens OP015 Terminal Keypad Replacement | Available Now |
| Siemens OP015A Part No. | Description | Inventory status |
Siemens OP015A series HMI Manuals PDF Download:
FAQ:
Question: What are the individual parts for the OP 015A 6FC5 203-0AF05-0AA0?
Answer: Operator panel front, backlight with backlight inverter, display support with keyboard controller (rear side), LCD unit, cap for the USB port and tension jacks.
Question: How to assembling an OP 015A 6FC5203-0AF05-0AA0 and a PCU?
Answer: When combining an OP 015A 6FC52030AF050AA0 and PCU, it is advisable to assemble them prior to installation in an assembly panel.
Question: How can I cool the machine of 6FC52030AF050AA0?
Answer: You can cool the machine of 6FC5 203-0AF05-0AA0 by natural convection.
Common misspellings:
FC5203-0AF05-0AA06FC523-0AF05-0AA0
6FC5203-0AF05-0AAA0
6FC5203-0AF050-AA0
6FC5203-0AF05-A0A0