M2I TOPRH Wireless Model TOPRHO700WD-W Overlay Glass

group name: M2I

Min Order: 1 piece

brand name: VICPAS

model: M2I TOPRHO700WD-W

Nearest port for product export: Guangzhou, Hongknog, Shenzhen, Taiwan

Delivery clauses under the trade mode: FOB, CFR, CIF, EXW, FAS, CIP, FCA, CPT, DEQ, DDP, DDU, Express Delivery, DAF, DES

Acceptable payment methods: T/T, L/C, D/P D/A, MoneyGram, Credit Card, PayPal, Westem Union, Cash, Escrow

update time: Thu, 28 Nov 2024 23:37:33 GMT

contact supplier

Paramtents

Brand M2I
Size 7 inch
Warranty 365 Days
Product Line M2I TOPRH Wireless Model
Supply TOPRHO700WD-W Touchscreen Front Overlay
Shipping 2-4 workdays
Part Number M2I TOPRH Wireless Model TOPRHO700WD-W

Packging & Delivery

Min Order1 piece

Briefing

M2I TOPRHO700WD-W Front Overlay HMI Touch Glass Replacement. 365 Days Warranty-Fully Tested-Factory Prices-Fast Shipping.

Detailed

M2I TOPRH Wireless Model TOPRHO700WD-W Protective Film Touch Screen Tablet Replacement

Order each part separately is available

M2I TOPRH Wireless Model TOPRHO700WD-W Front Overlay Touch Screen Monitor Repair Replacement

Fixing

Install clamps with M2I TOPRHO700WD-W Touch Screen Monitor Front Overlay product should be installed as follows to maintain the IP performance of the device.
a.Insert the clamp into the slot of the product.
b.Screw the unit into the TOPRHO700WD-W Front Overlay Touch Membrane panel cut with a screwdriver. If the screw is over tightened, it may cause the front deformation, thus resulting the touch sensor Can't work properly Tighten the screws to a torque of 0.2 N.m.

Setting System Recovery Mode of TOPRHO700WD-W Protective Film Touch Digitizer Glass

a.If the system fails to boot normally due to a problem during operation, the built-in recovery function can be used to maintain the factory default state. Please note that the built-in project will be deleted when using the recovery mode.
b.After opening the TOPRHO700WD-W Protective Film Touch Screen Monitor rear cover, you can adjust the setting switch. Keep the "BOOT UP"state when booting normally. If the system is recovering, turn off the power and set it to "RECOVERY".
c.When the recovery of M2I TOPRHO700WD-W HMI Panel Glass Front Overlay is completed, the buzzer sounds, then turn off the power and reset to "BOOT UP" state.

Contact Best Price

Specifications:

The table below describes the parameters of the M2I TOPRHO700WD-W Protective Film Touch Panel HMI Parts.

Warranty:	365 Days
Operating Humidity:	0 ~ 90 %
Display Type:	TFT Color
Screen Type:	Analog Resistive Film
Product Line:	TOPRH Wireless Model

Storage Temperature:	-10°C ~ +60°C
Operation Temperature:	0°C ~ +50°C
Backlight:	Yes
Part Number:	TOPRHO700WD-W
Ambient Humidity:	85% RH or less

Related M2I HMI Part No. :

M2I HMI	Description	Inventory status
TOPRE0400WD	M2I TOPRE Series Touch Screen Film Front Overlay Replacement	In Stock
TOPRH0700WD FE	M2I TOPRH Wired Series Protective Film Touch Digitizer Glass Repair	Available Now
TOPRW0700WD-IO	M2I TOPRW-IO Series HMI Touch Membrane Protective Film Repair	Available Now
TOPRW0710WD-IO	M2I TOPRW-IO Series Touch Screen Display Front Overlay Replacement	In Stock
M2I HMI	Description	Inventory status

M2I TOPRH Wireless Model HMI Manuals PDF Download:

Strengthen Customer's Industrial Value

M2I Corporation Industrial HMI Touch Panel HW Installation Manual

TOPPCVIEW Catalog

FAQ:

Question: What is the case material of M2I TOPRHO700WD-W Front Overlay Touch Panel Terminal?

Answer: The case material is PC(Flameless).

Question: What is the cooling system of TOPRH Wireless Model TOPRHO700WD-W Touch Membrane Protective Film Machine?

Answer: The cooling system of TOPRHO700WD-W is natural air circulation.

Question: What is M2I TOPRH Wireless Model TOPRHO700WD-W Touch Screen and Protective Film HMI parts price?

Answer: Submit a fast quote, send VICPAS an email for best price.

Common misspellings:

OPRHO700WD-W
TOPRHO700D-W
TOPRHO700WDW
TOPRHHO700WD-W
TOPRHO700W-DW