- Home
- About us
- Products
- for Siemens
- for A-B-B
- Advantech
- Allen Bradley
- AMTouch
- B&R Power Panel
- BECKHOFF HMI operator Repair
- Beijer HMI
- Bosch Rexroth
- Danielson Touch Screen Replacement
- Delem
- Delta
- DMC
- EATON Micro Panel
- ELO Touch Screen Panel
- ESA HMI
- Exor UniOP
- EZ Automation
- Fagor
- Fuji Hakko
- GE Fanuc
- GUNZE Touch Panel
- IDEC
- John Deere
- Koyo
- KUKA SmartPAD
- Lenze
- Microtouch 3M Versatouch touch screen
- Mitsubishi
- Omron
- Panasonic
- Parker
- Proface
- Red Lion
- Robotic Controller
- Schneider
- Sigmatek HMI
- Trimble
- Ventilator Parts
- Weinview
- Other Terminal Brand
- HMI Touch Screen Panel
- Touch Panel Screen Suppliers
- Touch Screen Panel supplier
- Auxiliary Accessories
- LCD Display
- Faqs
- News
- Certificate
- Contact us
HG3F-TP X0030-0001 Touch Screen Display Replacement
- group name
- HMI Touch Screen Panel
- Min Order
- 1 piece
- brand name
- VICPAS
- model
- HG3F-TP X0030-0001
- Nearest port for product export
- Guangzhou, Hongknog, Shenzhen, Taiwan
- Delivery clauses under the trade mode
- FOB, CFR, CIF, EXW, FAS, CIP, FCA, CPT, DEQ, DDP, DDU, Express Delivery, DAF, DES
- Acceptable payment methods
- T/T, L/C, D/P D/A, MoneyGram, Credit Card, PayPal, Westem Union, Cash, Escrow
- update time
- Fri, 22 Nov 2024 03:14:16 GMT
Paramtents
Warranty 365 Days
Shipping 2-4 workdays
Brand Vicpas
Supply Parts Touch Screen Panel
Display Size 10.4 inches
Packging & Delivery
-
Min Order1 piece
Briefing
Detailed
HG3F-TP X0030-0001 MMI Touch Screen Glass Replacement
Safety Precautions
1. Prevent the HG3F-TP X0030-0001 Touchscreen from falling while moving or transporting, otherwise damage or malfunction of the Touch will result.
2. Improper installation will result in falling, failure, electrical shock, fire hazard, or malfunction of the Touch.
3. Any twists in the gasket and the Mounting Gasket will impair the waterproof characteristics.
4. The HG3F-TP X0030-0001 Touch Panel is made of glass and will break if exposed to excessive shock. Take due care when handling it.
5. Do not push hard or scratch the touch panel and protection sheet with a hard object such as a tool, because they are damaged easily.
6. Do not tighten the mounting clips obliquely to the panel or excessively, otherwise the HG3F-TP X0030-0001 HMI Panel Glass may warp and cause wrinkle on the display, or the waterproof characteristics may be impaired.
7. The HG3F-TP X0030-0001 Touch Digitizer Glass uses an LCD(liquid crystal display) as a display device. The liquid inside the LCD is harmful to the skin. If the LCD is broken and the liquid attaches to your skin or clothes, wash the liquid off using soap, and consult a doctor immediately.
8. Turn off the power to the Touch before installation, removal, wiring, maintenance, and inspection of the Touch. Failure to turn power off may cause electrical shock or fire hazard.
9. Emergency and interlocking circuits must be configured outside of the HG3F-TP X0030-0001 Touch Membrane. Do not use the Touch's internal touch switches for an emergency circuit. If the Touch failed, the external equipment connected to the Touch will no longer be protected and serious injury to operators and equipment damage may be caused.
10. Special expertise is required to install, wire, configure, and operate the HG3F-TP X0030-0001 Touch Panel. People without such expertise must not use the Touch.
Specifications:
The table below describes the parameters of the HG3F-TP X0030-0001 Touch Digitizer Glass HMI.
| Warranty: | 1-Year Warranty |
| Storage Humidity: | 20 to 85% RH |
| Corrosion Immunity: | Free from corrosive gases |
| Storage Temperature: | -20 ~ 60°C |
| Brand: | Vicpas |
| Operating Temperature: | 0 ~ 50°C |
| Model Number: | HG3F-TP X0030-0001 |
| Display Size: | 10.4" |
| Screen Type: | Analog Resistive Film |
| Degree of Protection: | IP66 |
IDEC HG3F Series Manuals PDF Download:
FAQ:
Question: Can I connect external devices to the HG3F-TP X0030-0001 HMI?
Answer: Yes, the HG3F-TP X0030-0001 HMIs typically offer various communication ports, such as Ethernet, USB, RS232, or RS485. These ports allow you to connect external devices, such as PLCs, sensors, or other control equipment, for data exchange and system integration.
Question: How can I create and modify screens on the HG3F-TP X0030-0001 HMI?
Answer: HG3F-TP X0030-0001 HMI usually comes with dedicated software for screen development. Install the software on your computer, and then use it to design and customize screens with elements like buttons, images, text, and data display. The software often offers intuitive drag-and-drop interfaces for easy screen creation and modification.
Common misspellings:
H3F-TP X0030-0001
HG3FTP X0030-0001
HHG3F-TP X0030-0001
HG3F-TP X00300-001
HG3F-TPX0030-0001