- Home
- About us
- Products
- for Siemens
- for A-B-B
- Advantech
- Allen Bradley
- AMTouch
- B&R Power Panel
- BECKHOFF HMI operator Repair
- Beijer HMI
- Bosch Rexroth
- Danielson Touch Screen Replacement
- Delem
- Delta
- DMC
- EATON Micro Panel
- ELO Touch Screen Panel
- ESA HMI
- Exor UniOP
- EZ Automation
- Fagor
- Fuji Hakko
- GE Fanuc
- GUNZE Touch Panel
- IDEC
- John Deere
- Koyo
- KUKA SmartPAD
- Lenze
- Microtouch 3M Versatouch touch screen
- Mitsubishi
- Omron
- Panasonic
- Parker
- Proface
- Red Lion
- Robotic Controller
- Schneider
- Sigmatek HMI
- Trimble
- Ventilator Parts
- Weinview
- Other Terminal Brand
- HMI Touch Screen Panel
- Touch Panel Screen Suppliers
- Touch Screen Panel supplier
- Auxiliary Accessories
- LCD Display
- Faqs
- News
- Certificate
- Contact us
HG2S-TP X0005-0001 TP-3145S3 Touch Panel Replacement
- group name
- HMI Touch Screen Panel
- Min Order
- 1 piece
- brand name
- VICPAS
- model
- HG2S-TP X0005-0001 TP-3145S3
- Nearest port for product export
- Guangzhou, Hongknog, Shenzhen, Taiwan
- Delivery clauses under the trade mode
- FOB, CFR, CIF, EXW, FAS, CIP, FCA, CPT, DEQ, DDP, DDU, Express Delivery, DAF, DES
- Acceptable payment methods
- T/T, L/C, D/P D/A, MoneyGram, Credit Card, PayPal, Westem Union, Cash, Escrow
- update time
- Mon, 25 Nov 2024 10:12:57 GMT
Paramtents
Warranty 365 Days
Shipping 2-4 workdays
Brand Vicpas
Supply Parts Touch Screen Film
Packging & Delivery
-
Min Order1 piece
Briefing
Detailed
HG2S-TP X0005-0001 TP-3145S3 Touch Digitizer Glass Replacement
Safety Precautions
1. Prevent the HG2S-TP X0005-0001 TP-3145S3 Touchscreen from falling while moving or transporting, otherwise damage or malfunction of the Touch will result.
2. Improper installation will result in falling, failure, electrical shock, fire hazard, or malfunction of the Touch.
3. Any twists in the gasket and the Mounting Gasket will impair the waterproof characteristics.
4. The HG2S-TP X0005-0001 TP-3145S3 Touch Panel is made of glass and will break if exposed to excessive shock. Take due care when handling it.
5. Do not push hard or scratch the touch panel and protection sheet with a hard object such as a tool, because they are damaged easily.
6. Do not tighten the mounting clips obliquely to the panel or excessively, otherwise the HG2S-TP X0005-0001 TP-3145S3 HMI Panel Glass may warp and cause wrinkle on the display, or the waterproof characteristics may be impaired.
7. The HG2S-TP X0005-0001 TP-3145S3 Touch Digitizer Glass uses an LCD(liquid crystal display) as a display device. The liquid inside the LCD is harmful to the skin. If the LCD is broken and the liquid attaches to your skin or clothes, wash the liquid off using soap, and consult a doctor immediately.
8. Turn off the power to the Touch before installation, removal, wiring, maintenance, and inspection of the Touch. Failure to turn power off may cause electrical shock or fire hazard.
9. Emergency and interlocking circuits must be configured outside of the HG2S-TP X0005-0001 TP-3145S3 Touch Membrane. Do not use the Touch's internal touch switches for an emergency circuit. If the Touch failed, the external equipment connected to the Touch will no longer be protected and serious injury to operators and equipment damage may be caused.
10. Special expertise is required to install, wire, configure, and operate the HG2S-TP X0005-0001 TP-3145S3 Touch Panel. People without such expertise must not use the Touch.
Specifications:
The table below describes the parameters of the HG2S-TP X0005-0001 TP-3145S3 Touch Digitizer Glass HMI.
| Warranty: | 1-Year Warranty |
| Storage Humidity: | 20 to 85% RH |
| Corrosion Immunity: | Free from corrosive gases |
| Storage Temperature: | -20 ~ 60°C |
| Brand: | Vicpas |
| Operating Temperature: | 0 ~ 40°C |
| Operating Humidity: | 10 to 90% RH |
| Mounting: | Panel Mounting |
| Screen Type: | Analog Resistive Film |
| Degree of Protection: | IP65 |
IDEC HG2S Series Manuals PDF Download:
FAQ:
Question: Can I connect external devices to the HG2S-TP X0005-0001 TP-3145S3 HMI?
Answer: Yes, the HG2S-TP X0005-0001 TP-3145S3 HMIs typically offer various communication ports, such as Ethernet, USB, RS232, or RS485. These ports allow you to connect external devices, such as PLCs, sensors, or other control equipment, for data exchange and system integration.
Question: How can I create and modify screens on the HG2S-TP X0005-0001 TP-3145S3 HMI?
Answer: HG2S-TP X0005-0001 TP-3145S3 HMI usually comes with dedicated software for screen development. Install the software on your computer, and then use it to design and customize screens with elements like buttons, images, text, and data display. The software often offers intuitive drag-and-drop interfaces for easy screen creation and modification.
Common misspellings:
G2S-TP X0005-0001 TP-3145S3
HG2STP X0005-0001 TP-3145S3
HG2S-TP X005-0001 TP-3145S3
HG2S-TP X0005-000 TP-3145S3
HHG2S-TP X0005-0001 TP-3145S3