- Home
- About us
- Products
- for Siemens
- for A-B-B
- Advantech
- Allen Bradley
- AMTouch
- B&R Power Panel
- BECKHOFF HMI operator Repair
- Beijer HMI
- Bosch Rexroth
- Danielson Touch Screen Replacement
- Delem
- Delta
- DMC
- EATON Micro Panel
- ELO Touch Screen Panel
- ESA HMI
- Exor UniOP
- EZ Automation
- Fagor
- Fuji Hakko
- GE Fanuc
- GUNZE Touch Panel
- IDEC
- John Deere
- Koyo
- KUKA SmartPAD
- Lenze
- Microtouch 3M Versatouch touch screen
- Mitsubishi
- Omron
- Panasonic
- Parker
- Proface
- Red Lion
- Robotic Controller
- Schneider
- Sigmatek HMI
- Trimble
- Ventilator Parts
- Weinview
- Other Terminal Brand
- HMI Touch Screen Panel
- Touch Panel Screen Suppliers
- Touch Screen Panel supplier
- Auxiliary Accessories
- LCD Display
- Faqs
- News
- Certificate
- Contact us
FT-ASOO-5.7AV-10YL Touch Digitizer Glass Repair
- group name
- HMI Touch Screen Panel
- Min Order
- 1 piece
- brand name
- VICPAS
- model
- FT-ASOO-5.7AV-10YL
- Nearest port for product export
- Guangzhou, Hongknog, Shenzhen, Taiwan
- Delivery clauses under the trade mode
- FOB, CFR, CIF, EXW, FAS, CIP, FCA, CPT, DEQ, DDP, DDU, Express Delivery, DAF, DES
- Acceptable payment methods
- T/T, L/C, D/P D/A, MoneyGram, Credit Card, PayPal, Westem Union, Cash, Escrow
- update time
- Sun, 24 Nov 2024 21:05:28 GMT
Paramtents
Warranty 365 Days
Shipping 2-4 workdays
Supply Parts Touch Screen Monitor
Display Size 5.7 inches
Packging & Delivery
-
Min Order1 piece
Briefing
Detailed
FT-ASOO-5.7AV-10YL Touch Screen Tablet Replacement
Protective Sheet of FT-ASOO-5.7AV-10YL Touch Panel
1. Wipe any dirt off the display using a soft cloth slightly dampened with neutral detergent or alcoholic solvent.
2. Remove the back sheet of the protective sheet.
3. The tab of the protective sheet should be positioned at lower left. Align the right side of the protective sheet with that of the FT-ASOO-5.7AV-10YL Touch Screen Display, then apply the protective sheet onto the display. Care should be taken to avoid ingress of air.
4. On the top of protective sheet, a thin cover sheet is applied to prevent the protective sheet from being damaged during transportation. Remove it before using the FT-ASOO-5.7AV-10YL HMI Touch Glass.
5. When a protective sheet gets dirty or damaged, replace the protective sheet with a new one. When replacing the sheet, remove the used adhesives completely. The Protective Sheet has no protection effect against chemicals. FT-ASOO-5.7AV-10YL Touch Membrane has used a special material to filter out UV rays, however no warranty is given as to be installed in direct sunlight of outside.
6. Make sure that the specifications of the product conform to your requirements, and that no parts are missing or damaged due to accidents during transportation.
Mounting Caution
If the mounting clips are tightened obliquely to the panel, the FT-ASOO-5.7AV-10YL HMI Panel Screen may fall off the panel. When installing it into a panel cut-out, make sure that the gasket is not twisted especially when re-installing, take special care because any twists in the gasket will impair the waterproof characteristics.
Specifications:
The table below describes the parameters of the FT-ASOO-5.7AV-10YL Touch Screen Panel HMI.
| Storage Humidity: | 20 to 85% RH |
| Operating Humidity: | 10 to 90% RH |
| Degree of Protection: | IP65 |
| Storage Temperature: | -20 ~ 70°C |
| Display Type: | TFT Color |
| Screen Type: | Analog Resistive Film |
| Model Number: | FT-ASOO-5.7AV-10YL |
| Operating Temperature: | -20 ~ 60°C |
| Warranty: | 1-Year Warranty |
| Brand: | Vicpas |
IDEC HG2G 5.7in Enhanced Manuals PDF Download:
FAQ:
Question: How to adjust FT-ASOO-5.7AV-10YL Touchscreen Glass?
Answer:
Question: What is the size of the base screen of FT-ASOO-5.7AV-10YL Terminal?
Answer: It is equal the size of FT-ASOO-5.7AV-10YL touch screen.
Common misspellings:
T-ASOO-5.7AV-10YL
FT-SOO-5.7AV-10YL
FT-ASOO-5.7AV-10YYL
FT-ASOO-5.7AV-100YL
F-TASOO-5.7AV-10YL