- Home
- About us
- Products
- for Siemens
- for A-B-B
- Advantech
- Allen Bradley
- AMTouch
- B&R Power Panel
- BECKHOFF HMI operator Repair
- Beijer HMI
- Bosch Rexroth
- Danielson Touch Screen Replacement
- Delem
- Delta
- DMC
- EATON Micro Panel
- ELO Touch Screen Panel
- ESA HMI
- Exor UniOP
- EZ Automation
- Fagor
- Fuji Hakko
- GE Fanuc
- GUNZE Touch Panel
- IDEC
- John Deere
- Koyo
- KUKA SmartPAD
- Lenze
- Microtouch 3M Versatouch touch screen
- Mitsubishi
- Omron
- Panasonic
- Parker
- Proface
- Red Lion
- Robotic Controller
- Schneider
- Sigmatek HMI
- Trimble
- Ventilator Parts
- Weinview
- Other Terminal Brand
- HMI Touch Screen Panel
- Touch Panel Screen Suppliers
- Touch Screen Panel supplier
- Auxiliary Accessories
- LCD Display
- Faqs
- News
- Certificate
- Contact us
91-28557-F00 MMI Touch Screen Panel Glass Replacement
- group name
- HMI Touch Screen Panel
- Min Order
- 1 piece
- brand name
- VICPAS
- model
- 91-28557-F00
- Nearest port for product export
- Guangzhou, Hongknog, Shenzhen, Taiwan
- Delivery clauses under the trade mode
- FOB, CFR, CIF, EXW, FAS, CIP, FCA, CPT, DEQ, DDP, DDU, Express Delivery, DAF, DES
- Acceptable payment methods
- T/T, L/C, D/P D/A, MoneyGram, Credit Card, PayPal, Westem Union, Cash, Escrow
- update time
- Fri, 22 Nov 2024 03:42:52 GMT
Paramtents
Warranty 365 Days
Shipping 2-4 workdays
Brand Vicpas
Model Number 91-28557-F00
Supply Parts Touch Screen Panel
Size 15''
Touchscreen 5-Wire-Analog-Resisitive
Packging & Delivery
-
Min Order1 piece
Briefing
Detailed
91-28557-F00 HMI Touch Screen Display Glass Panel Replacement
Mounting Instruction
When mounting 91-28557-F00 Touch Digitizer Glass, more than one person should perform the installation. Be careful and prevent accidental damage to 91-28557-F00 Touch Screen Panel or personal injury.
Wall Mounting
1. Select the location on the wall for the wall mount plate.
2. Mark the locations of the two plate screw holes on the wall.
3. Drill two pilot holes at the marked locations on the wall.
4. Align the wall mount plate screw holes with the pilot holes.
5. Secure the mount plate to the wall by inserting screws into the two pilot holes and tightening them. Be careful not to drop 91-28557-F00 Touch Membrane to the ground.
6. Insert four M4 screws into the holes and tighten them to secure the bracket to the rear panel. Check the stability of 91-28557-F00 HMI Touch Glass.
7. To mount the device on the wall, align the wall mount bracket attached to the device with the wall mount plate on the wall and slide the device downward to hang the bracket on the mount plate.
8. Secure the device in place by tightening the screws into the wall mount bracket.
Specifications:
The table below describes the parameters of 91-28557-F00 HMI Touch Glass.
| Relative Humidity: | 95%RH |
| Storage Temperature : | -40 ~ 60°C (-40 ~ 140°F) |
| Touch Type: | Resistive 5 Wires |
| Light Transmission: | Above 75% |
| Display Size: | 15'' |
| Operating Temperature: | 0 ~ 50°C (32 ~ 122°F) |
| Environment: | Free From Corrosive Gases |
| Brand: | Vicpas |
| Warranty: | 1-Year Warranty |
| Durability (Touches): | 36 million |
Advantech HMI Manuals PDF Download:
FAQ:
Question: Which way can I finish the mounting without causing damage to 91-28557-F00 Touch Digitizer Glass?
Answer: Wall mounting, panel mounting, arm mounting and stand mounting will not do damage to 91-28557-F00 Touch Panel.
Question: How can I protect 91-28557-F00 Touch Screen Panel?
Answer: Do not leave 91-28557-F00 MMI Panel Screen in an environment with a storage temperature of below -40° C or above 60° C as this may cause damage.
Common misspellings:
1-28557-F00
91-28557F00
91-228557-F00
91-28557-FF00
91-28557-0F0