- Home
- About us
- Products
- for Siemens
- for A-B-B
- Advantech
- Allen Bradley
- AMTouch
- B&R Power Panel
- BECKHOFF HMI operator Repair
- Beijer HMI
- Bosch Rexroth
- Danielson Touch Screen Replacement
- Delem
- Delta
- DMC
- EATON Micro Panel
- ELO Touch Screen Panel
- ESA HMI
- Exor UniOP
- EZ Automation
- Fagor
- Fuji Hakko
- GE Fanuc
- GUNZE Touch Panel
- IDEC
- John Deere
- Koyo
- KUKA SmartPAD
- Lenze
- Microtouch 3M Versatouch touch screen
- Mitsubishi
- Omron
- Panasonic
- Parker
- Proface
- Red Lion
- Robotic Controller
- Schneider
- Sigmatek HMI
- Trimble
- Ventilator Parts
- Weinview
- Other Terminal Brand
- HMI Touch Screen Panel
- Touch Panel Screen Suppliers
- Touch Screen Panel supplier
- Auxiliary Accessories
- LCD Display
- Faqs
- News
- Certificate
- Contact us
A5E36010349 Touch Screen Display Replacement
- group name
- HMI Touch Screen Panel
- Min Order
- 1 piece
- brand name
- VICPAS
- model
- A5E36010349
- Nearest port for product export
- Guangzhou, Hongknog, Shenzhen, Taiwan
- Delivery clauses under the trade mode
- FOB, CFR, CIF, EXW, FAS, CIP, FCA, CPT, DEQ, DDP, DDU, Express Delivery, DAF, DES
- Acceptable payment methods
- T/T, L/C, D/P D/A, MoneyGram, Credit Card, PayPal, Westem Union, Cash, Escrow
- update time
- Mon, 25 Nov 2024 05:57:48 GMT
Paramtents
Touch screen panel type Capacitive
Size 19 inch
Brand Vicpas
Warranty 365 Days
Product Number A5E36010349
Shipping 2-4 Days
Supply Part Touch Screen Monitor
Packging & Delivery
-
Min Order1 piece
Briefing
Detailed
A5E36010349 HMI Touch Screen Glass Replacement Repair
Notes on mounting
The A5E36010349 Touch Screen must be mounted securely. Inadequately dimensioned fasteners may cause the A5E36010349 Touch Panel to fall down. Serious physical injury may result. Make sure that fasteners are adequately dimensioned during installation. Make sure to consider the weight and the forces acting on the A5E36010349 HMI Touch Glass when dimensioning. This applies in particular to dynamic load of the device. All fasteners including mounting surfaces, support arm systems, and fastening elements such as screws must be able to carry at least four times the weight of the device. Observe any further statutory specifications applying at the location of use of the A5E36010349 Touch Membrane and further applicable regulations with regard to fastening the device.
If you are using a support arm system or a pedestal system that does not have IP65 degree of protection or Enclosure Type 4X / 12 (indoor use only), IP65 degree of protection and Enclosure Type 4X / 12 (indoor use only) are voided for the entire device. Spray and water jets as well as penetrating substances can then damage the A5E36010349 Touch Digitizer Glass. Only use a support arm system or pedestal system that has IP65 degree of protection and Enclosure Type 4X / 12 (indoor use only).
Specifications:
The table below describes the parameters of the A5E36010349 Touch Digitizer Glass.
| Relative Humidity: | 90% |
| Display Type: | TFT LCD |
| Environment: | Free From Corrosive Gases |
| Front Panel: | IP65 |
| Resolution: | 1366 x 768 Pixels |
| Touch Size: | 19'' |
| Brand: | Vicpas |
| Relative Humidity: | 90% |
| Storage Temperature: | -20°C~60°C |
| Warranty: | 365 Days |
SIMATIC IPC477 Series Manuals PDF Download:
FAQ:
Question: What kind of ambient conditions should I keep and use A5E36010349 Touch Membrane?
Answer:
1. Against dust, moisture and heat.
2. Do not expose to direct sunlight or to other strong sources of light.
3. Without additional safety measures, such as a supply of clean air, A5E36010349 Touchscreen may not be used in locations with harsh operating conditions caused by acidic vapors or gases.
4. Always use suitable cleaning agents.
Question: What is the price of A5E36010349 Touch Screen Tablet?
Answer: Submit a fast quote, send VICPAS an email for best price.
Common misspellings:
A5336010349A5E36010394
A5E360110349
5E36010349
A5E30106349