2711-T9A5 PanelView 900 Touch Screen Panel Film Repair

Order each part separately is available

The Allen-Bradley 2711-T9A5 is a terminal that creates an interface between the machines and the human users. This terminal belongs to the discontinued PanelView 900 series. The display is a monochrome touch screen with a diagonal length is 9 in. The 2711-T9A5, also known as a human-machine interface or HMI, uses PanelBuilder 32 software to connect to a network with a DH-485 protocol controlled by the RS-232 port of 2711-NC13 printer and cable communication. The terminal’s touch screen contains a keypad for entering values, and the backlight is replaceable. A 120-volt AC unit powers the system. The internal memory can store up to 1 MB of data.

VICPAS supply Allen Bradley Panelview 900 2711-T9A5 touchscreen panel glass, LCD Display, Enclosure, Memory Card Retainer Base, Gasket, Sticker and protective film front overlay for repair replacement, make the HMI running. We provide a 1-year warranty of the most product, which include most of touch screen panel, membrane keypad, LCD display and protective case shell housing.

The firmware ranges between 1.00 and 4.48. The terminal weighs 8 pounds (3.6 kilograms) and has a length of 16 inches (40 centimeters), a width of 14 inches (35 centimeters), and a depth of 8 inches (20 centimeters). The DH-485 protocol enables point-to-point communication in a network with either a MicroLogix or an SLC 500 controller. If more than one processor is present, then the processors will communicate with each other using the system communicator. A programmable port enables file upload or download from the DH-485 network, but the exchange of files cannot take place without the Panelbuilder 32 software, or without an external memory card.