Touch screen panel for CP6202-0001-0020 touch panel membrane touch sensor glass replacement repair

Order each part separately is available

Despite the robust design of the package, CP6202-0000-0020 CP6202-0001-0020 CP6202-0020-0020 CP6202-0021-0020 LCD Screen Front Overlay Touch Membrane is sensitive to strong vibrations and impacts. During transporting CP6202-0000-0020 CP6202-0001-0020 CP6202-0020-0020 CP6202-0021-0020 Protective Film LCD Display HMI Touch Glass must therefore be protected from mechanical stress. Appropriate packaging of the device, such as the original packaging, can improve the vibration resistance during transport. Sometimes, there is a hardware damage due to condensation. Unfavorable weather and extreme environmental conditions during transport can cause damage to Beckhoff Touch Screen CP6202-0000-0020 CP6202-0001-0020 CP6202-0020-0020 CP6202-0021-0020 Touch Digitizer Glass LCD Screen Front Overlay .

• Protect the device against moisture (condensation) during transport in cold weather or in case of extreme temperature fluctuations.
• Do not put the device into operation until it has slowly adjusted to the room temperature.
• Should condensation occur, wait for about 12 hours before switching the device on.
• Avoid extreme environmental conditions.
• Protect the device against dust, moisture and heat.

In addition, incorrect installation of Beckhoff HMI CP6202-0000-0020 CP6202-0001-0020 CP6202-0020-0020 CP6202-0021-0020 Protective Film Touch Panel LCD Display prevents air circulation in the device and thus causes overheating and impaired functioning. Only install the device in the corresponding wall in the orientation shown. Mounting the device in a way that deviates from the documentation can impair its functionality.