New！Touch screen panel for CP6202-0001-0050 touch panel membrane touch sensor glass replacement repair

Order each part separately is available

ESD protection

In order to avoid damage caused by electrostatic discharge when replacing CP6202-0000-0050 CP6202-0001-0050 CP6202-0020-0050 CP6202-0021-0050 Protective Film Touch Screen Glass, protective measures are recommended. Below are some suggestions:
Protect Beckhoff Touch Panel CP6202-0000-0050 CP6202-0001-0050 CP6202-0020-0050 CP6202-0021-0050 Touch Screen Display Front Overlay and create an ESD-protected environment in which existing electrostatic charges are safely discharged to ground and charging is prevented.
• ESD-compliant floors with sufficient conductivity to the reference potential PE;
• ESD-compatible work surfaces such as tables and shelves;
• Wrist grounding strap, especially for sedentary activities;
• grounded and electrostatically dissipating equipment and operating materials (e.g. tools) within the ESD protection zone.

If it is not possible to create an ESD protection zone, you can still protect Beckhoff HMI CP6202-0000-0050 CP6202-0001-0050 CP6202-0020-0050 CP6202-0021-0050 Touch Screen Panel Protective Film against ESD damage. For example, the following measures can be used:
• Use conductive mats connected to the ground potential as underlays.
• Dissipate possible charges from your own body by touching grounded metal (e.g. control cabinet door).
• Wear a wrist grounding strap.
• Only remove new electronic components from the ESD packaging (tinted plastic bag) after putting on the wrist grounding strap.
• Do not walk around with electronic components in your hand if they are not in ESD packaging.