2711-T10G14L1 PanelView 1000 Touch Digitizer Protective Film

Order each part separately is available

VICPAS supply Allen Bradley Panelview Standard 1000 2711-T10G14L1 touchscreen panel glass, LCD Display Panel, Plastic Case Body, Gasket, Memory Card Retainer Base, Sticker and protective film front overlay for repair replacement, make the HMI running. We provide a 1-year warranty of the most product, which include most of touch screen panel, membrane keypad, LCD display and protective case shell housing.

The series Panelview 1000 module 2711-T10G14L1 is a communication terminal that allows a machine to communicate with PLC and SLC controllers over a variety of different kinds of networks, including DeviceNet, Modbus, or Profibus. This touch-input Panelview has a 10-inch grayscale display that doubles as an input touchscreen. Its display has an area approximately 8.3 by 6.2 inches in size and it has a backlight with around 50,000 hour half-life at 77 degrees Fahrenheit before requiring replacement. This module’s clock will timestamp the user’s critical inputs with a date and time, and the battery in the clock can be replaced on the field. Its memory consists of an application runtime of 310 kilobytes and a nonvolatile memory of 1008 kilobytes. This module runs on DC power only, as indicated by the “L1” extension on the part’s Catalog number. Its input voltage is roughly between 18 and 32 Volts DC but is nominally around 24 Volts DC. The 2711-T10G14L1 consumes around 24 Watts (or 1.0 A at 24 Volts of DC power). This module communicates through a DeviceNet communication port specifically, and it also has an RS-232 printer port. Its software, PanelBuilder32, can also run on a personal computer.

The 2711-T10G14L1 can withstand around 15 g of shock while in operation. Its non-operational shock limit is around 30 g. This module can be paired with a number of enclosures, among which are IEC IP54 and IP65, along with NEMA Types 12 and 13, and Type 4X for specific indoor applications. The 2711-T10G14L1 dissipates around 36 Watts of heat (132 BTU per hour). It should not be mounted any higher than 2000 meters at the most and should be kept in a temperature zone of 32 to 131 degrees Fahrenheit while operating. When the module is in storage, keep it within -13 to 158 degrees Fahrenheit.