2711P-T7C15D1 PanelView Plus 700 Touch Screen Protective film

Order each part separately is available

VICPAS supply Panelview Plus 700 2711P-T7C15D1 protective film touchscreen LCD Panel Plastic Shell Label Gasket and Mounting Clips for repair replacement, make the HMI running. We provide a 365 days VICPAS warranty of the most product, which include most of touch screen panel, membrane keypad, LCD display and protective case shell housing.

The Allen-Bradley 2711P-T7C15D1 is one version of the PanelView™ Plus 6 – 700 Terminals. This terminal has a 6.5-inch touchscreen. The display type is color active matrix TFT and has 640 x 480 resolution with 18-bit color graphics. The width of the display is 5.2 x 3.9 inches. This display has a CCFL backlight that is replaceable. The luminance of this terminal is 300 cd/m2 (Nits). The weight of this terminal is approximately 1.7 kg. This terminal comes with a flash memory of 64 MB, a 512-MB RAM, and a 79-MB free user memory. The Allen-Bradley 2711P-T7C15D1 has dimensions of 179 x 246 x 55 mm. This terminal also has an SD card slot for external storage. This terminal supports the Windows CE 6.0 operating system and the FactoryTalk View Machine Edition software version 6.0. This terminal has an Ethernet port for being connected to the internet. This terminal has an input voltage of 18-32V DC. The power consumption is 70 W maximum and 39 W typical.

The Allen-Bradley 2711P-T7C15D1 has a removable battery. When you install and remove the battery, be sure to remove the power first. For a complete step of removing and installing the battery is readily available in the manual. Keep the battery in a cool and dry place. The recommended temperature for battery storage is 25 °C with a relative humidity is 40 – 60%. Never store the battery at a temperature of 60 °C for more than three days to avoid the possibility of leakage.

The discontinued Allen Bradley Panelview Plus 700 2711P-T7C15D1 is an operator terminal that enables the user to interface with their machine. This HMI has a 6.5-inch color display. This Panelview allows the user to connect to machines using FactoryTalk View Machine Edition software and a ControlNet communication port with a 1747-KFC15A communication cable(s). The user is able to control the HMI using the touchscreen to input information and data. If applicable, this unit has an internal backlight replacement part number of 2711P-RL7C2. The most common Series are Series A, B, C, D, E, F, and G, but the most common firmware is not applicable. The ControlNet terminals can connect to a single or multiple controllers on a ControlNet network. They support scheduled and unscheduled access to controller data They also support redundant cabling. The ControlNet terminals support symbolic CIP addressing when communicating to a ControlLogix system. Every terminal features a Network Access port for local access to the ControlNet network. Application files are easily downloaded or uploaded using PanelBuilder32 over the ControlNet link, directly via the onboard RS-232 printer port, or with a PC memory card.