2711P-T12W22D9P Panelview Plus 7 Touch Screen Panel

Order each part separately is available

The PanelView Plus 7 Performance Terminal 2711P-T12W22D9P uses an EtherNet/IP embedded switch. 2711P-T12W22D9P communicate with ControlLogix and CompactLogix controllers over an Ethernet connection with DLR, linear, or star network topologies. The terminals can reside on EtherNet/IP networks that run integrated motion and CIP Sync™ applications without affecting performance. The terminal is not a consumer or producer of CIP Sync or motion packets.

PanelView Plus 7 Standard and Performance Models
 Lead product for new applications
 Extends our portfolio with more display sizes and certifications
 Reflects our commitment to application longevity
Same FactoryTalk View software across all PanelView Plus product lines

The Standard and Performance clamps look different:
 The clamps for the PanelView Plus 7 line are designed to create the right amount of clamping pressure around the unit with breakaway tabs to prevent over torqueing. Each clamp is two sided, so if you break one side, you can use the other.
 The system is designed to allow customers to mount the terminals with no tools. See product literature for the clamping sequence.
 At full release, there will be two different clamp styles. One for Standard (Grey) and one for Performance (Black). They are not meant to be used cross platform because the Performance (Black) clamps allow for a higher clamping torque and can crack the bezel on the Standard terminal.The PanelView Plus 7 Performance stainless steel models use 2711P-RTMC clamps

The PanelView™ Plus 7 Performance Terminal 2711P-T12W22D9P operator interface device. 2711P-T12W22D9P monitor and control devices that are attached to ControlLogix® and CompactLogix™ 5370 controllers on an EtherNet/IP™ network. Animated graphic and text displays provide operators a view into the operating state of a machine or process. Operators interact with the control system by using touch screen or keypad input.