Panelview Plus 7 2711P-T9W22D8S Touch Panel Screen

Order each part separately is available

Animated graphic and text displays provide operators a view into the operating state of a machine or process. Operators interact with the control system by using touch screen input. The 5.7-in. and 10.4-in. touch-screen terminals are shown for illustrative purposes. All other terminal sizes look similar. For information on proper mounting clamp installation, refer to the PanelView Plus 7 Standard Terminals User Manual, publication 2711P-UM007.

PanelView Plus 7 Standard and Performance Models
 Lead product for new applications
 Extends our portfolio with more display sizes and certifications
 Reflects our commitment to application longevity
Same FactoryTalk View software across all PanelView Plus product lines

The Standard and Performance clamps look different:
 The clamps for the PanelView Plus 7 line are designed to create the right amount of clamping pressure around the unit with breakaway tabs to prevent over torqueing. Each clamp is two sided, so if you break one side, you can use the other.
 The system is designed to allow customers to mount the terminals with no tools. See product literature for the clamping sequence.
 At full release, there will be two different clamp styles. One for Standard (Grey) and one for Performance (Black). They are not meant to be used cross platform because the Performance (Black) clamps allow for a higher clamping torque and can crack the bezel on the Standard terminal.The PanelView Plus 7 Performance stainless steel models use 2711P-RTMC clamps

Standard Model – Single Ethernet
 Machine Builder Focus
 Sizes: 4”-15”
 Single Ethernet or DLR
 Touch Screen
 Low Profile, Composite Bezel
 FactoryTalk View Machine Edition - supporting MER files back to 5.1
 7 Catalogs – Allen-Bradley® Branded
 7 Catalogs – No Branding