Paramtents
Brand UniOP
Warranty 365 Days
Product Line UniOP eTOP49 series
Supply eTOP49-0050 Front Overlay HMI Touch Glass
Model eTOP49-0050
Size 12.1 inch
Packging & Delivery
Min Order1 piece
Briefing
Detailed
Order each part separately is available
VICPAS supply eTOP49-0050 Front Overlay Touch Screen Monitor UniOP eTOP49 with 365 Days warranty and support Urgent Worldwide Shipping.
eTOP05E-0045 Touch Screen Panel Overlay HMI Features:
• 12.1” TFT color display
• High brightness
• Sunlight-readable
• SVGA (800x600 pixel) resolution
• 64K colors
• Resistive eTOP05E-0045 touchscreen
• 10/100 Ethernet interface
• USB port
• Connection to industrial bus systems using optional plug-in modules
• Compatible with video input module
• 64 MB user memory
• Compatible with local I/O
The table below describes the parameters of the eTOP49-0050 UniOP eTOP49 Touch Panel Front Overlay.
Part Number: | eTOP49-0050 |
Display Type: | TFT |
Resolution: | 800x600 pixel |
Backlight: | CCFL |
Warranty: | 365 Days |
Input Power: | 24VDC (+10%, -15%) |
Touch screen: | Resistive |
Product Line: | UniOP eTOP49 series |
Operating Temperature: | 0 to 45 °C |
Related UniOP Series Part No. :
UniOP eTOP | Description | Inventory status |
eTOP49-0050 | UniOP eTOP Touch Screen Monitor Overlay Repair | In Stock |
eTOP49C-0050 | Touch Screen Protective Film UniOP eTOP eTOP49C | Available Now |
eTOP49CP-0052 | UniOP eTOP49CP Touch Screen Glass Front Overlay | In Stock |
6ZA1059-7ET10 | UniOP eTOP Touch Screen Panel Protective Film | In Stock |
eTOP50-0045 | UniOP eTOP50 Touch Screen Overlay Replacement | In Stock |
eTOP50-0050 | HMI Panel Glass Overlay eTOP eTOP50 Repair | Available Now |
eTOP50B-0050 | UniOP eTOP Front Overlay Touch Panel Glass | In Stock |
eTOP50C-0050 | UniOP eTOP Touch Screen Protective Film Repair | Available Now |
eTOP50CP-0052 | UniOP eTOP50CP Touch Digitizer Protective Film | In Stock |
eTOP59B-0050 | HMI Panel Glass Overlay eTOP eTOP59B Repair | Available Now |
eTOP59C-0050 | UniOP eTOP59C HMI Panel Glass Front Overlay | In Stock |
eTOP59CP-0052 | UniOP eTOP eTOP59CP Touch Protective Film | In Stock |
Exor UniOP HMI | Description | Inventory status |
Question: What are the eTOP49-0050 Touch Panel Protective Film HMI installation procedures?
Answer: Place the four fixing brackets on the longer side near the corners, as shown in figure . Screw each fixing screw until the plastic or aluminium bezel corner get in contact with the panel.
Question: How to cleaning eTOP49-0050 IHM faceplates?
Answer: The equipment must be cleaned only with a soft cloth and neutral soap product. Do not use solvents.
网络文化经营许可证:浙网文[2013]0268-027号|增值电信业务经营许可证:浙B2-20080224-1 2007-2024 Tradevv.com. All rights reserved.