HMIST6700 HMISTW6700 Front Overlay HMI Panel Glass

Order each part separately is available

VICPAS supply HMIST6700 HMISTW6700 Schneider Harmony ST6 & STW6 Protective Film and Touch screen panel glass with 365 Days warranty and support Urgent Worldwide Shipping.

When applying and installing this HMIST6700 HMISTW6700 Touch digitizer glass front overlay product, it is important that steps are taken to eliminate any pressure difference between the inside and the outside of the enclosure in which this HMIST6700 HMISTW6700 Front Overlay HMI Panel Glass product is mounted. Higher pressure inside the enclosure can cause delamination of the front membrane of the HMIST6700 HMISTW6700 display. Even a small pressure difference inside the enclosure will act on the large area of the membrane and can result in sufficient force to delaminate the membrane and thus cause failure of the HMIST6700 HMISTW6700 touch capability. Pressure differences can often occur in applications where there are multiple fans and ventilators moving air at different rates in different rooms. Please follow these techniques to ensure that this product's function is not impacted by this mis-application:
1. Seal all conduit connections inside of the enclosure, especially those that lead to other rooms that may be at a different pressure.
2. Where applicable, install a small weep hole at the bottom of the enclosure to allow equalization of the internal and external pressure.