Paramtents
Brand Higgstec Touch Screen
Warranty 365 Days
Supply T150S-5RBA04N-0A28R0-200FH Touch Digitizer Glass
Size 15 inch
Touch Screen Type Resistance touch screen
Packging & Delivery
Min Order1 piece
Briefing
Detailed
VICPAS supply T150S-5RBA04N-0A28R0-200FH HMI panel glass with VICPAS 365 days warranty and support Urgent Worldwide Shipping. A modification of our 5-wire resistive technology suitable to be used in full outdoor applications, where bright sunlight can potentially make the T150S-5RBA04N-0A28R0-200FH touch screen unreadable. T150S-5RBA04N-0A28R0-200FH Touch Screen Monitor Higgstec's Sunlight Readable solution dramatically reduces reflectance and increases contrast ratio, while also preventing birefringence when the screen is viewed through polarizer sunglasses, making T150S-5RBA04N-0A28R0-200FH Touch Screen Panel a popular choice for military, automotive and other outdoor use applications.
A polarizer and two layers of 1/4 wavelength retardation film are added to the stack-up of our 5-wire T150S-5RBA04N-0A28R0-200FH resistive touch panel. In addition, the ITO coated film is made from non-PET isotropic material. When an incoming light ray passes through the touch panel it is transformed from unpolarized light into circular-polarized light. Then as it is reflected, it is transformed again from circular-polarized light into linear-polarized light. The T150S-5RBA04N-0A28R0-200FH Touch Digitizer Glass HMI light ray is unable to pass back through the front polarizer, and internal reflection is eliminated.
The table below describes the parameters of the Higgstec T150S-5RBA04N-0A28R0-200FH Touchscreen Parts.
Part Number: | T150S-5RBA04N-0A28R0-200FH |
Display: | TFT |
Warranty: | 365 days Warranty |
Size: | 15 inch |
Light Transmittance: | 80% ± 3% |
Resolution: | 4096 X 4096 |
Number of Touches: | Single |
Operation Temperature: | -10~+70°C |
Response time: | ≦ 20ms |
Surface Hardness: | ≧ 3H |
Related Higgstec Touch Screen HMI Part No. :
Higgstec Touch Screen | Description | Inventory status |
T150S-5RB008N-0A28R0-150FH | Higgstec Touch Screen Glass Replacement | In Stock |
T150S-5RB017N-0A18R0-200FH | Higgstec Touch Screen Panel Replacement | Available Now |
T150S-5RB017N-0A18R0-200FH-C | Higgstec HMI Touchscreen Repair Part | In Stock |
T150S-5RB027X-0A18R0-108FB | Higgstec HMI Touch Screen Glass | Available Now |
T150S-5RB054N-0A18R0-250FH-C | Higgstec Touch Screen Panel Repair | In Stock |
T150S-5RB09N-0A28R0-300FH | Higgstec Touch Membrane Repair | In Stock |
T150S-5RBA04N-0A28R0-200FH | Higgstec HMI Touch Glass Repair | In Stock |
T150S-5RBA05X-0A28R0-150FH | Higgstec HMI Panel Glass Replacement | Available Now |
T150S-5RBB04X-0A18R0-300FH | Higgstec Touch Digitizer Glass Repair | Available Now |
T150S-5RBB25N-0Q28R0-200FH | Higgstec Touch Screen Monitor Repair | In Stock |
Higgstec Touch Panel | Description | Inventory status |
Question: Attention of Higgstec T150S-5RBA04N-0A28R0-200FH Touch Panel Mounting Condition?
Answer:
(1) The gasket support of the T150S-5RBA04N-0A28R0-200FH touch panel must allocate outside of Viewable Area. Reserve enough clearance between T150S-5RBA04N-0A28R0-200FH panel surface and enclosure for normal panel operation.
To avoid pressing error, please retain enough space between the T150S-5RBA04N-0A28R0-200FH surface panel and Bezel.
(2) Bezel opening must not touch T150S-5RBA04N-0A28R0-200FH touch digitizer Viewable Area; Bezel opening must be designed between T150S-5RBA04N-0A28R0-200FH touchscreen panel screen Viewable Area and Active Area.
(3) We recommend elastic material support.
(4) Due to the conductive characteristic of the panel backside, prevent metal contact after mounting.
(5) Do not use adhesive to bond top surface (ITO Film) of T150S-5RBA04N-0A28R0-200FH touch panel with enclosure.
(6) Proper grounding of the controller at all times assures normal operation.
(7) During assembly. Please take into consideration the variance in the different module designs, whether it would cause physical, cosmetic or functional damages to the T150S-5RBA04N-0A28R0-200FH touch panel when completing the assembly.
(8) After installation,please perform 4 point and 25-point calibration.
网络文化经营许可证:浙网文[2013]0268-027号|增值电信业务经营许可证:浙B2-20080224-1 2007-2024 Tradevv.com. All rights reserved.