- Home
- About us
- Products
- for Siemens
- for A-B-B
- Advantech
- Allen Bradley
- AMTouch
- B&R Power Panel
- BECKHOFF HMI operator Repair
- Beijer HMI
- Bosch Rexroth
- Danielson Touch Screen Replacement
- Delem
- Delta
- DMC
- EATON Micro Panel
- ELO Touch Screen Panel
- ESA HMI
- Exor UniOP
- EZ Automation
- Fagor
- Fuji Hakko
- GE Fanuc
- GUNZE Touch Panel
- IDEC
- John Deere
- Koyo
- KUKA SmartPAD
- Lenze
- Microtouch 3M Versatouch touch screen
- Mitsubishi
- Omron
- Panasonic
- Parker
- Proface
- Red Lion
- Robotic Controller
- Schneider
- Sigmatek HMI
- Trimble
- Ventilator Parts
- Weinview
- Other Terminal Brand
- HMI Touch Screen Panel
- Touch Panel Screen Suppliers
- Touch Screen Panel supplier
- Auxiliary Accessories
- LCD Display
- Faqs
- News
- Certificate
- Contact us
IDEC FT1A-C12RA-B HMI Touch Screen Panel Glass Repair
- group name
- HG2A, HG2S, FT1A 3.8-inch PLC+HMI
- Min Order
- 1 piece
- brand name
- VICPAS
- model
- FT1A-C12RA-B
- Nearest port for product export
- Guangzhou, Hongknog, Shenzhen, Taiwan
- Delivery clauses under the trade mode
- FOB, CFR, CIF, EXW, FAS, CIP, FCA, CPT, DEQ, DDP, DDU, Express Delivery, DAF, DES
- Acceptable payment methods
- T/T, L/C, D/P D/A, MoneyGram, Credit Card, PayPal, Westem Union, Cash, Escrow
- update time
- Fri, 29 Nov 2024 11:36:21 GMT
Paramtents
Warranty 365 Days
Shipping 2-4 workdays
Brand IDEC
Supply Parts Touchscreen Glass
Display Size 3.8 inches
Packging & Delivery
-
Min Order1 piece
Briefing
Detailed
IDEC FT1A 3.8IN PLC+HMI FT1A-C12RA-B HMI Panel Glass Replacement
Instruction for protective sheet
The Protective Sheet of FT1A-C12RA-B Touch Membrane is replaceable, transparent sheet to protect a display of HG series. With the protective sheet covered on the display, you can operate touch switches.
1. Wipe any dirt off the FT1A-C12RA-B Touch Screen Display using a soft cloth slightly dampened with neutral detergent or alcoholic solvent.
2. Remove the back sheet of the protective sheet.
3. The tab of the protective sheet should be positioned at lower left. Align the right side of the protective sheet with that of the FT1A-C12RA-B Touch Screen Film, then apply the protective sheet onto the display. Care should be taken to avoid the ingress of air.
4. On the top of the protective sheet, a thin cover sheet is applied to prevent the protective sheet from being damaged during transportation. Remove it before using the display of HG series.
When a protective sheet of FT1A-C12RA-B HMI Touch Glass gets dirty or damaged, replace the protective sheet with a new one. When replacing the sheet, remove the used adhesives completely. The Protective Sheet has no protection effect against chemicals. This FT1A-C12RA-B Touch Membrane has used a special material to filter out UV rays, however no warranty is given as to be installed in direct sunlight of outside.
Specifications:
The table below describes the parameters of the IDEC FT1A 3.8IN PLC+HMI FT1A-C12RA-B Touch Digitizer Glass HMI.
| Brand: | IDEC |
| Product Line: | FT1A 3.8IN PLC+HMI |
| Display Color: | 65,536 Colors |
| Touchscreen: | Analog Resistive |
| Warranty: | 1-Year Warranty |
| Display Size: | 3.8" |
| Screen Type: | TFT Color |
| Model Number: | FT1A-C12RA-B |
| Operating Temperature: | 0 ~ 55°C |
| Storage Temperature: | -20 ~ 70°C |
Related IDEC FT1A 3.8IN PLC+HMI No. :
| FT1A 3.8IN PLC+HMI | Description | Inventory status |
| FT1A-C12RA-S | IDEC FT1A 3.8IN PLC+HMI Touch Digitizer Glass Repair | Available Now |
| FT1A-C14KA-B | IDEC FT1A 3.8IN PLC+HMI Touch Screen Film Replacement | In Stock |
| FT1A-C14KA-S | IDEC FT1A 3.8IN PLC+HMI Touch Screen Glass Repair | Available Now |
| FT1A-C14SA-B | IDEC FT1A 3.8IN PLC+HMI Touch Screen Display Replacement | In Stock |
| FT1A-C14SA-S | IDEC FT1A 3.8IN PLC+HMI MMI Panel Screen Repair | Available Now |
| FT1A-M12RA-B | IDEC FT1A 3.8IN PLC+HMI Touchscreen Monitor Replacement | In Stock |
| FT1A-M12RA-S | IDEC FT1A 3.8IN PLC+HMI Touch Screen Tablet Repair | Available Now |
| FT1A-M14KA-B | IDEC FT1A 3.8IN PLC+HMI Touch Screen Film Replacement | In Stock |
| FT1A-M14KA-S | IDEC FT1A 3.8IN PLC+HMI HMI Touch Membrane Repair | Available Now |
| FT1A-M14SA-B | IDEC FT1A 3.8IN PLC+HMI Touch Screen Glass Replacement | In Stock |
| FT1A-M14SA-S | IDEC FT1A 3.8IN PLC+HMI Touch Screen Panel Repair | Available Now |
| FT1A 3.8IN PLC+HMI | Description | Inventory status |
IDEC FT1A 3.8IN PLC+HMI Manuals PDF Download:
FAQ:
Question: What is the size of the base screen of FT1A-C12RA-B Terminal?
Answer: It is equal the size of FT1A-C12RA-B Touch Screen.
Question: What are the screen types of FT1A-C12RA-B machine?
Answer: The screen types of FT1A-C12RA-B HMI are base screen, popup screen and system screen.
Question: How to maintain FT1A-C12RA-B HMI Touch Glass?
Answer: To wipe off smears on the lens and the surfaces of FT1A-C12RA-B Touch Panel, use a soft cloth dampened with the following solvents. Use neutral detergent(squeeze the cloth tightly) or alcoholic solvents. Do not use solvents such as thinner, ammonia, strong acid and strong alkaline.
Common misspellings:
T1A-C12RA-B
FT1AC12RA-B
FT1A-C12RAB
FT1A-C12RA-
FT1A-C12R-AB