Paramtents
Warranty 365 Days
Shipping 2-4 workdays
Brand IDEC
Supply Parts Touchscreen Digitizer
Display Size 3.8 inches
Packging & Delivery
Min Order1 piece
Briefing
Detailed
Operating environment
For designed performance and safety of the touchscreen, do not install the FT1A-C14SA-S Touch Panel in the following environments:
1. Where dust, briny air, or iron particles exist.
2. Where oil or chemical splashes for a long time.
3. Where oil mist is filled.
4. In direct sunlight.
5. Where strong ultraviolet rays exist.
6. Where corrosive or combustible gasses exist.
7. Where the FT1A-C14SA-S Touch Screen is subjected to shocks or vibrations.
8. Where condensation occurs due to rapid temperature change.
9. Where high-voltage or arc-generating equipment (electromagnetic contactors or circuit protectors)exists in the vicinity.
Ambient temperature for FT1A-C14SA-S HMI Touch Glass
1. Allow sufficient space for ventilation, and install the equipment away from heat sources.
2. Allow at least 100mm between the Touch and walls or other equipment.
3. Do not install the FT1A-C14SA-S Touch Digitizer where the ambient temperature exceeds the rated operating ambient temperature range. When mounting the Touch in such locations, provide a forced air-cooling fan or air-conditioner to keep the ambient temperature within the rated temperature range.
4. The FT1A-C14SA-S Touch Screen Tablet is designed to install on a vertical plane so that natural air-cooling is provided.
5. If you install it using any other orientation, use forced-air cooling, or lower the ambient operating temperature.
The table below describes the parameters of the IDEC FT1A 3.8IN PLC+HMI FT1A-C14SA-S Touch Screen Glass HMI.
Degree of Protection: | IP65 |
Operating Humidity: | 10 to 90% RH |
Brand: | IDEC |
Storage Temperature: | -20 ~ 70°C |
Display Type: | 256 Color LCD |
Product Line: | FT1A 3.8IN PLC+HMI |
Model Number: | FT1A-C14SA-S |
Warranty: | 1-Year Warranty |
Display Size: | 3.8" |
Operating Temperature: | -20 ~ 60°C |
Related IDEC FT1A 3.8IN PLC+HMI No. :
FT1A 3.8IN PLC+HMI | Description | Inventory status |
FT1A-C12RA-B | IDEC FT1A 3.8IN PLC+HMI Touch Screen Panel Replacement | In Stock |
FT1A-C12RA-S | IDEC FT1A 3.8IN PLC+HMI Touch Digitizer Glass Repair | Available Now |
FT1A-C14KA-B | IDEC FT1A 3.8IN PLC+HMI Touch Screen Film Replacement | In Stock |
FT1A-C14KA-S | IDEC FT1A 3.8IN PLC+HMI Touch Screen Glass Repair | Available Now |
FT1A-C14SA-B | IDEC FT1A 3.8IN PLC+HMI Touch Screen Display Replacement | In Stock |
FT1A-M12RA-B | IDEC FT1A 3.8IN PLC+HMI Touchscreen Monitor Replacement | In Stock |
FT1A-M12RA-S | IDEC FT1A 3.8IN PLC+HMI Touch Screen Tablet Repair | Available Now |
FT1A-M14KA-B | IDEC FT1A 3.8IN PLC+HMI Touch Screen Film Replacement | In Stock |
FT1A-M14KA-S | IDEC FT1A 3.8IN PLC+HMI HMI Touch Membrane Repair | Available Now |
FT1A-M14SA-B | IDEC FT1A 3.8IN PLC+HMI Touch Screen Glass Replacement | In Stock |
FT1A-M14SA-S | IDEC FT1A 3.8IN PLC+HMI Touch Screen Panel Repair | Available Now |
FT1A 3.8IN PLC+HMI | Description | Inventory status |
Question: How to adjust FT1A-C14SA-S Touchscreen Glass?
Answer:
Question: What should I pay attention to during operation?
Answer: During operation, the screen becomes blank when the backlight is burnt out; however, the Touch Screen Monitor of FT1A-C14SA-S Terminal remains enabled. Incorrect touch panel operation will occur when operating the touch panel when the backlight appears to be turned off but is actually burnt out. Note that this erroneous operation may result in damage.
T1A-C14SA-S
FT1A-C14S-S
FT1A-C14SA-SS
FT1A-C14S-AS
FT1A-C14SAS-
网络文化经营许可证:浙网文[2013]0268-027号|增值电信业务经营许可证:浙B2-20080224-1 2007-2024 Tradevv.com. All rights reserved.