IPC 477E PRO 6AV7251-5FB07-0DA0 MMI Panel Screen Replacement

Ambient conditions and chemical resistance

Unsuitable environmental conditions can cause faults or damage the Siemens 6AV7 251-5FB07-0DA0 Touch Screen Panel. Failure to comply voids the warranty and the approvals in accordance with IEC/EN/UL 61010-2-201. For this reason, please observe the following precautions:
• Always operate the 6AV72515FB070DA0 Touch Membrane in closed rooms.
• Operate the device only in accordance with the ambient conditions specified in the technical specifications.
• Protect the IPC477E PRO 6AV7251-5FB07-0DA0 HMI Touch Glass from dust, moisture and heat.
• Do not expose the device to direct sunlight or to other strong sources of light.
• Without additional safety measures, such as a supply of clean air, the Siemens 6AV7 251-5FB07-0DA0 Touch Digitizer Glass may not be used in locations with harsh operating conditions caused by acidic vapors or gases.
• Observe the permitted operating positions of the device.
• Clean the enclosure surface with a damp cloth and make sure that no water enters the Simatic 6AV7251-5FB07-0DA0 MMI Panel Screen.

If you use IPC 477E PRO 6AV72515FB070DA0 Touchscreen in an industrial environment without additional protective measures, the industrial environment should be in accordance with IEC 60721-3-3 (pollutant class 3C2 for chemical influences, 3S2 for dust without sand).