LOMA SYSTEMS IQ4 Waferthin Metal Detection control panel Touchpad Overlay

LOMA SYSTEMS METAL DETECTION IQ4 Waferthin Metal Detection control monitor Touch Digitizer Glass Front Overlay Repair

Attentions

1. Store the equipment in a dry place, away from moisture and high humidity, to avoid damage to LOMA SYSTEMS IQ4 Waferthin Metal Detection Touch Membrane Front Overlay.
2. Avoid pouring or spilling any liquids onto the IQ4 Waferthin Metal Detection Protective Film MMI Panel Screen, as this could cause electrical shock or even fire.
3. Read and follow all safety guidelines carefully to ensure the equipment is used safely and correctly.
4. During installation of the Loma Systems Metal Detector IQ4 Waferthin Metal Detection Protective Film Touch Panel, place the equipment on a stable and secure surface to prevent accidental drops, which could result in malfunctions or physical damage.
5. The LOMA SYSTEMS IQ4 Waferthin Metal Detection Touch Digitizer Front Overlay is designed for factory environments and can operate within a temperature range of -10 to +40 °C (14 to 104 °F).
6. For devices that require a power outlet, make sure the socket is located close to the equipment and is easily accessible at all times.
7. Do not attempt to open the equipment yourself. For safety reasons, only certified technicians should perform maintenance or repairs.
8. If LOMA SYSTEMS METAL DETECTION IQ4 Waferthin Metal Detection Front Overlay Touch Screen Glass has been dropped and damaged, have the equipment inspected by qualified service personnel.

Specifications:

The table below describes the parameters of the LOMA SYSTEMS IQ4 Waferthin Metal Detection Front Overlay HMI Touch Glass.

Related LOMA SYSTEMS HMI Part No. :

LOMA SYSTEMS METAL DETECTION Manuals PDF Download: