Paramtents
Warranty 365 Days
Shipping 2-4 workdays
Brand IDEC
Supply Parts Front Overlay HMI Touch Glass
Touch Type Resistive
Shipping DHL/FedEx/UPS/TNT/EMS/Aramex /DPEX
Packging & Delivery
Min Order1 piece
Briefing
Detailed
Maintenance and Inspection of HG3G-VAXT22MF-B Protective Film Touch Screen Display
Maintain and inspect the IDEC HG3G-VAXT22MF-B Touch Digitizer Glass Overlay Film periodically to ensure the best performance. Do not disassemble, repair, or modify HG3G-VAXT22MF-B Protective Film MMI Touch Glass during inspection. Wipe any stain off the display using a soft cloth slightly dampened with neutral detergent or alcoholic solvent. Do not use solvents such as thinner, ammonia, strong acid, and strong alkaline. Check the terminals and connectors to make sure of no loose screws, incomplete insertion or disconnected lines. Make sure that all mounting clips and screws are tightened sufficiently.If the mounting clips are loose, tighten the screw to the recommended tightening torque.
Adjusting IDEC HG3G 10in High-Performance HG3G-VAXT22MF-B Touch Panel Front Overlay
A gap may be caused in the operation accuracy of the touch panel by the secular distortion, etc. Readjust the touch panel when there is a gap in the operation of the touch panel.
Panel Cut-out Dimensions of HG3G-VAXT22MF-B Touchscreen Front Overlay
Place the IDEC Terminal in a panel cut-out and fasten with the attached mounting clips. Do not tighten excessively, otherwise the HG3G-VAXT22MF-B Overlay Film Touch Membrane may warp and cause wrinkle on the display, or impair the waterproof characteristics.
Note for operation
The screen becomes blank when the backlight is burnt out; however, the HG3G-VAXT22MF-B Touch Panel Protective Film remains enabled. Incorrect touch panel operation will occur when operating the touch panel when the backlight appears to be turned off but is actually burnt out. Note that this erroneous operation may result in damage.
The table below describes the parameters of the IDEC HG3G 10in High-Performance HG3G-VAXT22MF-B Touch Screen Monitor Front Overlay HMI.
Corrosion Immunity: | Free from corrosive gases |
Operating Humidity: | 10 to 90% RH |
Light Transmission: | Above 80% |
Storage Temperature: | -20 ~ 70°C |
Operating Temperature: | -20 ~ 60°C |
Brand: | IDEC |
Model Number: | HG3G-VAXT22MF-B |
Warranty: | 1-Year Warranty |
Product Line: | HG3G 10in High-Performance |
Touch Type: | Resistive |
Related IDEC HMI No. :
IDEC HMI | Description | Inventory status |
HG2G-V5FT22TF-B | IDEC High Performance Series Touch Screen Panel Front Overlay Replacement | In Stock |
HG2G-V5FT22TF-W | IDEC High Performance Series Protective Film Touch Digitizer Glass Repair | Available Now |
HG3G-8JT22MF-B | IDEC High Performance Series Touch Digitizer Overlay Film Replacement | In Stock |
HG3G-8JT22MF-W | IDEC High Performance Series Touch Screen Glass Protective Film Repair | Available Now |
HG3G-8JT22TF-B | IDEC High Performance Series Touch Screen Display Front Overlay Replacement | In Stock |
HG3G-8JT22TF-W | IDEC High Performance Series Protective Film HMI Panel Screen Repair | Available Now |
HG3G-AJT22MF-B | IDEC HG3G 10in High-Performance Touch Screen Front Overlay Repair | In Stock |
HG3G-AJT22MF-W | IDEC HG3G 10in High-Performance Protective Film Touch Panel Replacement | Available Now |
HG3G-AJT22TF-B | IDEC HG3G 10in High-Performance Front Overlay MMI Panel Screen Repair | In Stock |
HG3G-AJT22TF-W | IDEC HG3G 10in High-Performance Touch Screen Glass Protective Film Repair | Available Now |
HG3G-V8XT22MF-B | IDEC High Performance Series Touchscreen Monitor Front Overlay Replacement | In Stock |
HG3G-V8XT22MF-W | IDEC High Performance Series Touch Screen Film Protective Film Repair | Available Now |
HG3G-VAXT22MF-B | IDEC HG3G 10in High-Performance Front Overlay Touch Digitizer Replacement | In Stock |
HG3G-VAXT22MF-W | IDEC HG3G 10in High-Performance Touch Screen Panel Protective Film Repair | Available Now |
HG4G-CJT22MF-B | IDEC High Performance Series Front Overlay Touch Monitor Replacement | In Stock |
HG4G-CJT22TF-B | IDEC High Performance Series Protective Film Touch Membrane Repair | Available Now |
HG4G-VCXT22MF-B | IDEC High Performance Series Touch Screen Tablet Front Overlay Replacement | In Stock |
IDEC HMI | Description | Inventory status |
Question: How do I calibrate the touch screen on the HG3G-VAXT22MF-B HMI?
Answer: To calibrate the touch panel of HG3G-VAXT22MF-B, go to the calibration settings in the HMI menu. Follow the on-screen instructions to touch specific calibration points accurately. This process ensures accurate touch input across the screen.
Question: How to install IDEC HG3G 10in High-Performance HG3G-VAXT22MF-B Terminal?
Answer:
HG3GVAXT22MFB
HG3G-VAX22MF-B
HG3G-VAXT22FM-B
HG3G-VTXT22MF-B
HG3G-VAXXT22MF-B
网络文化经营许可证:浙网文[2013]0268-027号|增值电信业务经营许可证:浙B2-20080224-1 2007-2025 Tradevv.com. All rights reserved.